DIY Build Bamboo Trellis For Vegetable Garden



Using bamboo rods or some other type of homemade trellis, you can easily create your own DIY build bamboo trellis to help vegetables grow up instead of out into the ground.

As you may know, some vegetables are more prone to disease when planted directly into the ground, so keeping them off the ground and elevated with your DIY build bamboo trellis will ensure that disease doesn’t spread as quickly and can be more easily treated if it does occur. So, here’s how to build a DIY bamboo trellis yourself!

Bamboo Stakes for Trellis on Amazon

Hydrofarm HGBB6 6′ Natural, pack of 25 Bamboo Stake, Tan

  • Natural finish, Strong and durable
  • Use indoors or outdoors
  • Lightweight stakes have a smooth, attractive finish
  • Approximate diameter 13-17mm

1) Choosing Bamboo For Trellises

Bamboo is one of the most commonly used materials for trellises in vegetable gardens. It is inexpensive, durable, and has a low maintenance cost. However, bamboo is not often used because it can take up to three years before it’s ready to use as a trellis

. Despite this, many people choose to build their DIY bamboo trellises because they want the flexibility of choosing their length and diameter, or they want to be able to cut it down when it’s no longer needed.

Source: Pinterest

2) Choosing The Location Of Your Bamboo Trellis

The location of your trellis will depend on what type of vegetables you want to grow. For example, a trellis should be placed at least one foot further from the plant if you want to grow tomatoes. However, if you are growing beans or peas that need to climb, they should be grown under your trellis.

The height and width of the bamboo trellis will also depend on what vegetable you plan to grow. For example, you can make a frame out of wood and attach bamboo sticks horizontally to form a ladder-like structure, which is best for vines like peas and beans.

On the other hand, if you are growing cucumbers and melons, your bamboo trellis needs to be much taller, with lots more room between each row.

3) Preparing The Site For The DIY Bamboo Trellis

If you’re planning to add a trellis to your garden, you’ll need to clear the desired area of any plants and ensure it is level. If not, use a shovel or spade to remove any bumps and fill in low areas with soil. Once that’s done, it’s time to decide on the location for the trellis.

 You’ll want to choose a location that will allow you to work comfortably and won’t block any windows or doors. Be sure to avoid areas with too much sun, as they can get hot and may require shading. Also, keep in mind that you’ll have easier access to your trellis if it’s close to a water source, making watering easier. Once you’ve decided on a spot, mark out its borders with stakes and string so you can see where it will go once your project is completed.

4) Choose The Design And Construction Type

You can choose from various designs and construction types for trellises, including DIY bamboo trellises. This particular design is made with bamboo poles and twine. First, cut the poles to the desired height. Then, tie one end of the twine to each pole. Next, tie the opposite ends of the twine together at a desired height off the ground–this is your baseline.

Once you have this in place, loosely weave the twine back and forth between each pole so that it looks like a tic-tac-toe board, the most important thing is to ensure there are no holes or gaps in the pattern so that sunlight does not reach any part of the vegetable garden below.

 Finally, fasten loose ends together by twisting them tightly using needle-nose pliers.

Latest Posts

5) Building The Frame Of The Trellis

The first step to building the trellis frame is to take two posts and measure them against each other. Once you know how long you want your trellis, measure the distance between them. Now add an inch or two to account for the error and cut both posts to that length.

Now drill four evenly spaced holes in one post and then place it on top of the other post, ensuring that it’s lined up with the holes drilled in the first post.

Put screws through the bottom post into the top and tighten them until they’re snug. Repeat this process for all six posts until you have a square frame, securing all of the joints tightly with screws as you go. Once complete, use wire cutters to trim away any excess wood from around the outside of the frame so that it’s even all around.

Source: Pinterest

6) Covering The Frame Of The Trellis

To create the frame for the trellis, you will need to find two pieces of bamboo about 12 feet long. The width should be 3 inches, and both pieces should be at least 2 inches in diameter. Using a power saw, cut the ends of the bamboo pieces to be straight. Next, drill two holes into each end of one piece of bamboo and then connect it to the other piece with four bolts and nuts.

 Now that you have finished assembling your frame, it’s time to start working on the cover. First, cut a piece of bamboo that is about 5 feet long. Next, take two pieces of rope and tie them around both ends of one end of your bamboo stick. Then, tie it onto both sides of your frame to cover each side completely. You can use some nails to keep them in place if needed.

7) Finishing Touches, Storing, And Maintaining The Bamboo Garden Trellis

A trellis is a beautiful addition to any vegetable garden.

It provides support for the plants and can also be used as a screen to block unwanted views or create privacy. Plus, they are straightforward and inexpensive to build!

Here are some finishing touches you may want to consider when building your trellis:

– You can either attach the bamboo poles with twine or wire. If using wire, use galvanized wire to ensure that it lasts longer. You will need a drill and wire cutters. Drill holes into each end of the pieces where you would like them to connect, and then thread the wires through one hole at a time before twisting them tightly around each other on the opposite side of the hole. Alternatively, use sturdy nylon string instead of wire if you want something more natural.

– To keep the trellis from toppling over, place bricks (or rocks) in two lines near its base to act as a weight-bearing base.

– Use screws to hold in place any top railings you have created along the top of your trellis by drilling pilot holes first and screwing in the screws until tight.

– Avoid hanging anything heavy such as bird feeders, bird houses, or hammocks, off the bottom edge of your trellis because this could cause the wood to break.

– Paint all surfaces of your new bamboo garden trellis to protect against weather damage and mold growth. Painting can help extend the life of your trellis significantly. In addition, painting takes little time to do, making an old, tattered garden look fresher and newer than ever! You can find many kinds of paint designed for exterior projects online and in stores.

Types Of Bamboo Trellises

Bamboo trellises are a great way to help the plants in your garden grow vertically instead of outwards. This will help them get better access to sunlight and keep them from getting trampled on. There are a few different bamboo trellises types that you can build in your garden, and We’ll see some of the most popular ones below.

Source: Pinterest

Tripod Trellis

The tripod style of the trellis is made with three poles or stakes in the ground at equal distances apart. These should be long enough to reach where you want to place the top horizontal pole. Tie lengths of twine between each stake, then tie another length around all three stakes near the bottom. You can weave these lengths into a grid pattern or wrap one side around another, whichever is easier for you.

Flat Trellis

 To create a flat trellis, take two long poles and lean them against each other. Then, plant your seeds on opposite sides of each pole. The poles can either be resting against a wall or standing in a shallow trench in your garden bed.

Arch Trellis

 To make an arch trellis, you’ll need three stakes of equal height. Drive them about six inches into your garden bed, then tie lengths of twine between each stake. These should be placed about six to eight inches apart from one another and long enough so that they form an arch over your plants when tied together.

Woven Trellis

 To make a woven trellis, you’ll need to find three stakes about six inches in length and tie lengths of twine between them at equal distances. Next, tie your seeds or seedlings on opposite sides of each stake to plant your garden. These bamboo trellises should be placed roughly two feet apart from one another.

Cage & Ladder Bamboo Trellis

One type of DIY bamboo trellis worth mentioning is the cage & ladder design. This trellis is suitable for tomato/vegetable plants because it has plenty of space between the slats to allow ample airflow and light while still providing protection. You’ll need five bamboo pieces of equal length, which you’ll lay on their sides in a pentagon shape (you can also use any size piece depending on how big you’d like your trellis). Cut notches along the lengths of each piece so they can fit together securely.

How To Build A Simple Bamboo Trellis

Final Thoughts

Building a DIY bamboo trellis for your vegetable garden is not only an inexpensive way to get the job done, but it also adds a unique design element to the area. Plus, bamboo is sustainable and eco-friendly! There are many ways to build a bamboo trellis – these instructions offer just one example of how you can do so. You may also want to add tomato cages or teepees around your plants to provide additional support while they grow and climb their way up the trellis.

 If you plan on adding flowers to your garden, try planting them near the top of the trellis, where they will receive full sunlight. Remember that taller vegetables should be planted closer to the ground, whereas smaller ones should be placed near the top. Try using stakes at various heights to give your veggies more room, and your DIY bamboo trellis will be perfect.



Similar Posts